Fixing the error “The update is not applicable to this computer. Update KB4012212 is not applicable to this computer Update is not applicable to Windows 7 computer

KB4012212 is a security update for Windows 7 only. It does not contain new operating system features. The KB4012212 update is used to protect your computer from the WannaCry ransomware virus. Which encrypts all files on the computer, and then demands a ransom on an electronic wallet to decrypt them. To protect yourself from this virus, you need to download the KB4012212 update for your Windows 7 operating system from the official Microsoft website. During installation, you may receive the message "KB4012212 update is not applicable to this computer." I will try to figure out this problem in this article.

Update KB4012212 is not applicable to this computer - Step 1

First, make sure that the KB4012212 update matches the bitness of your operating system. You can read how to determine the OS bit depth and find out the differences between versions. If the bit depth does not match, then download the required update KB4012212 from the official Microsoft website. Let's try to start the installation again. If the steps described above did not help resolve the “KB4012212 update is not applicable to this computer” error, then proceed to the next step.

Update KB4012212 is not applicable to this computer - Step 2

Now we check the operating system for the presence of Service Pack 1 installed. SP 1 contains a package of fixes, updates and patches for Windows 7. As well as fixes for some operating system errors. Right-click on “My Computer” and select “Properties”. In the “Windows edition” field (to the left of the icon) Service Pack 1 should be written. If there is no inscription, then you will have to download Service Pack 1 from the official Microsoft website. The site will offer several files for download. We need windows6.1-KB976932-X64.exe (for 64-bit Windows 7) or windows6.1-KB976932-X86.exe (for 32-bit Windows 7). Download the required file and install Service Pack 1 for Windows 7. Installation may take about an hour. And the computer may be restarted several times. After installing Service Pack 1, we try to install the KB4012212 update again. The installation should be successful and the "KB4012212 update is not applicable to this computer" message should not appear.

If the article "KB4012212 update is not applicable to this computer" was useful to you, please share it with your friends

While PC users who are running Windows 7 and previous versions will be forced to purchase a copy of Windows 8.1, the latest version of Windows 8.1 is available to download for free for existing Windows 8 users. That is, if your computer is running Windows 8, then your computer has eligible for free updates and can upgrade to Windows 8.1 from Windows 8 without losing files and installed applications. But many users seem to have problems installing the new Windows 8.1 Preview update from Microsoft. People have been complaining that they are unable to get the Windows 8.1 update and are experiencing errors during the update process. If you are unable to install Windows 8.1 correctly, this article describes several possible solutions to this problem. Before diving into the cause of the problem, there are a few.

Installing Windows 8.1 Preview

To install Windows 8.1 Preview, you must be signed in to a Microsoft account. Therefore, if you are currently using a local account, switch to a Microsoft account. The settings will revert back to your local account and will be available once you upgrade to the final version of Windows 8.1, which will be released at a later date.
Download the update package (~15MB) from Microsoft and install it. Restart your computer and as soon as you log into Windows you will be prompted to upgrade to Windows 8.1.

When you open the Windows Store app, you will see Windows 8.1 Preview listed.
Installation 2.44GB as stated and you can continue the update process from there.

Error “The update is not applicable to your computer”

If this error occurs when installing higher than specified (~ 15MB) file from Microsoft, you may need to install the package manually. You can use the command line to get the installed update.

1.Select a location and rename it Windows8-RT-KB2849636-x64.msu file in an accessible location, e.g. C:\8preview\windows81.msu
2.Next, you need to run the command line as an administrator and run the following commands.
3.Expand-F:* c:\8preview\windows81.msu C:\8preview\

4.DISM.exe /Online /Add-Package /PackagePath:c:\8preview\Windows8-RT-KB2849636-x64.cab

If you are using a 32-bit operating system, the file name will be Windows8-RT-KB2849636-x86.cab, replace it accordingly.

If you still have questions, you may need to install the system language ru-RU. This is not recommended by Microsoft for installing Windows 8.1.

Press the Windows key and type regedit.exe and open the Windows Registry Editor.
Switch to HKey_Local_Machine\System\CurrentControlSet\Control\Nls\Language
Change the “InstallLanguage” line at the very bottom of the right panel so that the value is 0409 which is EN-US.

This should resolve the issue and restart your computer and visit the Windows Store to see Windows 8.1 Preview listed first.

“Windows 8.1 Preview is currently unavailable. Please try again later.”

After receiving the latest steps above, you may receive the above error message. All you can do now is just keep trying with Windows servers that could be attacked right now. Once you succeed, the update will begin installing and will run in the background so you can continue working while it installs.

Quite often, when updating the system, we receive various errors that do not allow us to complete this procedure correctly. They arise for various reasons - from malfunctions of the necessary components to simple user inattention. In this article we will discuss one of the common errors, accompanied by a message that the update is not applicable to your computer.

Similar problems most often arise on pirated versions of the “seven”, as well as its “crooked” assemblies. Burglars can remove the necessary components or damage them during subsequent packaging. This is why in descriptions of images on torrents we can find the phrase “updates are disabled” or “do not update the system.”

There are other reasons.

When downloading the update from the official website, an error was made in selecting the bit depth or version of Windows.
The package you are trying to install is already present on the system.
There are no previous updates, without which new ones simply cannot be installed.
There was a malfunction in the components responsible for unpacking and installation.
The antivirus blocked the installer, or rather, prohibited it from making changes to the system.
The OS was attacked by malware.

We will analyze the reasons in order of increasing difficulty in eliminating them, since sometimes you can perform a few simple steps to solve the problem. First of all, you need to exclude possible damage to the file during downloading. To do this, you need to delete it and then download it again. If the situation has not changed, then proceed to the recommendations below.

Reason 1: Inappropriate version and bit depth

Before downloading the update from the official website, make sure that it is suitable for your OS version and its bit depth. You can do this by expanding the list of system requirements on the download page.

Reason 2: The package is already installed

This is one of the simplest and most common reasons. We may not remember or simply not know what updates are installed on the PC. The check is quite easy.

Reason 3: Previous updates are missing

Everything is simple here: you need to update the system automatically or manually using "Update Center". After the operation is completely completed, you can install the necessary package, having first checked the list, as in the description of reason number 1.

If you are the “lucky” owner of a pirated assembly, then these recommendations may not work.

Reason 4: Antivirus

No matter how “smart” the developers call their products, antivirus programs quite often raise a false alarm. They especially closely monitor those applications that work with system folders, the files located in them, and registry keys responsible for configuring OS settings. The most obvious solution is to temporarily disable the antivirus.

If disabling is impossible, or your antivirus is not mentioned in the article (link above), then you can use a fail-safe technique. Its meaning is to boot the system into "Safe mode", in which all anti-virus programs cannot be launched.

Reason 5: Component failure

In this case, manual unpacking and installation of the update using system utilities will help us. expand.exe And dism.exe. They are built-in components of Windows and do not require downloading or installation.

Let's look at the process using the example of one of the update packages for Windows 7. This procedure must be performed from an account that has administrator rights.

Reason 6: Damaged system files

Let's start right away with a warning. If you are using a pirated version of Windows or you have made changes to system files, for example, when installing a design package, then the actions that you need to perform may lead to the system not working.

This is a system utility. sfc.exe, which checks the integrity of system files and, if necessary (possible), replaces them with workable copies.

If the utility reports that recovery is impossible, perform the same operation in "Safe Mode".

Reason 7: Viruses

Viruses are the eternal enemies of Windows users. Such programs can cause a lot of trouble - from damaging some files to disabling the entire system. In order to identify and remove malicious applications, you must use the recommendations given in the article, the link to which you will find below.

Conclusion

We already said at the beginning of the article that the problem under discussion is most often observed on pirated copies of Windows. If this is your case, and the methods to eliminate the causes did not work, then you will have to refuse to install the update or switch to using a licensed operating system.

Good afternoon, admin! I'm trying to manually install security update KB4103723 on a computer running Windows 10 1607, which I downloaded manually from the Windows Update catalog site (automatic updates do not work, because the computer is on an internal network, isolated from the Internet). I downloaded the MSU update file, I’m trying to launch it, the “ Windows Offline Update Installer: Search for updates on this computer", and after 2 minutes the error appears:

The update is not applicable to this computer.

How do I install this security update? Without this update, when making a remote RDP connection to a computer, the CredSSP encryption oracle remediation error appears (I install the update according to your article). What should I do?

Answer

I cannot give a clear answer as to why a specific update is not applicable to your computer; here you need to look at the computer itself. But I will try to look at the main reasons why it is impossible to install a Windows security update and how to solve the problem.

So, the error " The update is not applicable to this computer» ( The Update is not applicable to your Computer– in the English version of Windows) appears when you try to manually install an MSU update using the wusa.exe utility (Windows Offline Update Installer). Why Windows 10/8.1/7 may think the update is not applicable:

In some cases, you can try to install the MSU update file not through the WUSA.exe utility (it is used by the same standalone Windows update installer), but by unpacking the CAB file and installing it through DISM or the Add-WindowsPackage cmdlet directly into the Windows image. For your update, the manual update installation procedure might look like this:

: expand _f:* “C:\Temp\windows10.0-KB4103723-x64.msu” C:\Temp\KB4103723
A CAB with a name like Windows10.0-KB4103723-x64.cab will appear in the C:\Temp\KB4103723 directory;
Install this update CAB file using DISM.exe (DISM.exe /Online /Add-Package /PackagePath:c:\Temp\Windows10.0-KB4103723-x64.cab) or using PowerShell (Add-WindowsPackage -Online -PackagePath “c:\Temp\Windows10.0-KB4103723-x64.cab”)

Regarding your case. It is not necessary to install the KB4103723 update. This is a cumulative update for Windows 10 1607 x64 from May 2018, so you can install any later update for your version of Windows, because. it already includes all previous updates. For example, you can install the KB4467684 (November 2018) update for Windows 10 1607.

Sometimes it is useful to look at a specific error code for installing updates in the Event Viewer console. Go to section Installation (Event Viewer > Windows Logs > Setup) and find the event with the source WUSA, most likely it will contain text like this.

Microsoft said that within 24 hours of the official public release of Windows 10, it was installed on more than 14 million devices. Current data suggests that this figure has now increased significantly.

The more users actively upgrade their PCs running Windows 7 or 8.1 to the free version of Windows 10, the more problems and questions arise during the installation of these updates.

Microsoft responded immediately and provided all the necessary instructions to resolve errors and resolve problems encountered by users.

This error occurs when your device contains drivers or other software that is not yet compatible with Windows 10.

Open the update installation utility (Get Windows 10), click the Menu button and select Scan my PC to find incompatible drivers and software. After this procedure, you will be redirected to the Microsoft website to install updates to newer and compatible software versions. If no updates are found, simply uninstall those programs and drivers that are not supported in Windows 10 to avoid errors when installing the update. After successfully installing Windows 10, try reinstalling the removed drivers and software.

Error 0x80073712

Error 0x80073712 indicates that one of the files required to install the update is lost or damaged.

Error 0x80200056

When you see error 0x80200056, it means that the installation process was interrupted by an unexpected system reboot or shutdown of your device. Just try to run the installation process again, but first make sure that your computer is connected to a stable power source.

Error 0x800F0922

Error 0x800F0922 tells you that your PC can't access Windows Update. If you are using a VPN connection, try disconnecting from the network, turning off the VPN, then establishing a direct connection and trying to update again.

Also, error 0x800F0922 may be caused by the fact that there is not enough free space on the system partition reserved by the system. To solve this problem, you may need third-party software that allows you to work with partitions of your hard drive. Increase the space in the System Reserved partition and try the installation again.

Errors “We were unable to complete the update. Cancel changes. Don't turn off your device" and "Windows update failed. Cancel changes"

Both of these errors may appear on the display at any time during the installation of the update. To understand what caused the installation to be canceled, you need to review your update history and look for the specific error code that caused the cancellation. To do this, open Control Panel, select Show all settings, open Windows Update, and find View update history. Find in the list the update that completed with an error and double-click to open the details to find the specific error code.

Errors with codes 0xC1900200 – 0x20008 and 0xC1900202 – 0x20008

Error codes 0xC1900200 – 0x20008 and 0xC1900202 – 0x20008 indicate that your device does not meet the minimum system requirements required to install and upgrade to Windows 10.

Check out the Windows Compatibility Center for more information and to find out which parts or software won't support upgrading to Windows 10.

Errors 0xC1900208 – 0x4000C

Errors 0xC1900208 – 0x4000C indicate that your PC has incompatible software installed that is blocking the installation of the update. Check your device for viruses and malware, remove it and try installation again.

Errors 0x80070070 – 0x50011, 0x80070070 – 0x50012 and 0x80070070 – 0x60000

If your device does not have enough free space to install or update Windows 10, you will see one of these errors: 0x80070070 - 0x50011, 0x80070070 - 0x50012, and 0x80070070 - 0x60000. If this does happen, free up more space on your hard drive and try the installation again.

Error "The update is not applicable to your computer" »

The error “The update is not applicable to your computer” indicates that some required updates to the current version of the operating system are not installed on your system. Make sure you have installed all available updates before you begin the Windows 10 upgrade process.

Windows 10 activation problems

As reported by the Windows Central team, another common issue is that many users, after going through the Windows 10 update and installation process, are receiving a message that Windows 10 is not activated.

Microsoft allows a clean installation of Windows 10. They also recommend that users save a copy of the free “Get Windows 10” utility to avoid activation errors.

Many users prefer a clean installation. To do this, you need to perform all manipulations through Windows Update. This allows you to use your current Windows 7 or Windows 8.1 key to further activate Windows 10.

If your PC still fails to activate, you need to use telephone activation. Open the Settings application, go to the Update & Security menu and select Activation.

Activation errors

While trying to activate Windows 10, you may see error 0xC004C003, which means that your PC cannot connect to the Microsoft activation server. Check your network connection and try again.

You may also receive error 0xC004F061 - this means that you are trying to activate Windows 10, but the previous version of Windows was not activated properly. The only solution for this problem is to reinstall the previous version of Windows, activate it and try to upgrade your PC to Windows 10 again.

Found a typo? Select the text and press Ctrl + Enter

Categories

Editor's Choice