home > Social network > Installation via Windows Update


Installation via Windows Update




Microsoft has released cumulative update KB4343885 for Windows 10 version 1703 (Creators Update) on x86 and x64 processors.

Installation via Windows Update

Cumulative update 4343885 for PC is installed automatically through Windows Update. To check, go to Settings > Update & Security and click Check for updates. You will need to restart your computer to complete the installation. After the update, the Windows 10 build number will change to 15063.1266.

Download update KB4343885

You can also download the update and install it manually from the link below:

Note. If you have installed previous cumulative updates, this time you only need to install a differential update, which includes only the latest changes. If you skipped previous updates, you need to select the full cumulative update package.

Improvements and fixes KB4343885 (15063.1266)

This update includes quality updates. New system functions are not presented. List of key fixes and improvements.

If you installed previous updates, only the new changes in the rollup will be applied this time.

Found a typo? Highlight and press Ctrl + Enter

During the automatic installation of Windows 10 updates, the user may encounter error 0x800f081f when updating the system to version 1709. This error usually appears when installing cumulative updates that complement the system functionality of the Windows OS and install new patches. Below I will analyze the essence of this dysfunction, and also explain how to fix error 0x800f081f on your PC.

The appearance of the Version 1709 error is usually associated with the installation of the following series of updates:

KB4048955
KB4051963
KB4054517
KB4056892
KB4058258
KB4074588
KB4090913

At the same time, the most recent cases of error 0x800f081f were associated with the cumulative update of Windows version 1709 for 64-bit systems (KB4074588).

In almost all cases, the appearance of error 0x800f081f prevents the installation of a fresh update. The update process freezes at some point and does not move further.

The reasons for the error in Windows 10 may be the following:

How to fix error 0x800f081f when updating Windows 10

Let's move on to listing ways to get rid of error 0x800f081f on user PCs. Before you start implementing them, temporarily disable your computer's firewall and antivirus, and also make sure that various USB devices that can cause the error are not connected to your PC. If necessary, disable them, try to update the system through “All Settings”, where select “Update and Security”. If the error “Cumulative update for Windows 10 Version 1709 error 0x800f081f” continues to occur, proceed to implement the methods below.

Enable No Framework 3.5 on your PC

Error 0x800f081f often signals the need to install the Net Framework 3.5 platform on the user's computer. Do the following:


Use the troubleshooting tool

Download and run the Windows 10 troubleshooter from the Microsoft website. Click on “Next” and select to run the tool as administrator.


Delete the SoftwareDistribution folder

Windows OS collects update files in the C:\Windows\SoftwareDistribution folder. These files may be damaged and we will need to recreate them to install the updates correctly. Do the following:


Manually install updates KB4054517 and KB4074588

If the above methods did not help, try installing updates manually KB4054517 and KB4074588. If you suddenly encounter an update error, try installing it again (for example, for some users the KB4074588 update was installed only the second or third time).

Activate System Restore functionality

To implement this method, we will need a flash drive with the installation version of Windows 10. Boot from this flash drive, select the language and time on the basic screen, and then click on “Next”. On the next screen at the bottom left, select “System Restore”, then “Command Prompt”, and then type the following in sequence, not forgetting the necessary spaces:

Reboot your PC.

Use the Media Creation Tool

And the last, quite effective way to solve error 0x800f081f is to use the “Media Creation Tool”.

  1. Go to microsoft.com, click on "Download Tool Now".
  2. Next, download and run the tool, select “Update this PC now.”
  3. And follow further product instructions.

Conclusion

If error 0x800f081f occurs associated with the cumulative update for Windows 10 Version 1709, it is recommended that you first check that the system has a working No Framework 3.5 platform. If the specified platform is present and active, then consistently use the other tips listed in this article to solve the problem on your PC.

In the spring of 2017, Microsoft announced that on April 11 of the same year it would be possible to download Windows 10 creator update 1703 version from their official website. These were their official plans. Today, almost exactly a year has passed since the release, and we decided to remember this build, because it is still the best that you can download and install for free on your PC, even on a weak laptop, and everything will work like a clock!

Although the official release took place on April 11, in reality the distribution leaked online within 2 weeks. This is not the first time that Microsoft software was made possible before the release date. And you didn’t even have to “join the ranks” of the Windows Insider Program. It seems that the developers deliberately leak things online ahead of time in order to gain popularity.

Should I use Windows 10 Update Assistant?

At first, to make it easier for users to go through the update process, it was necessary to resort to using the Windows 10 Update Assistant, and in order to download Windows 10 creator update 1703 it is worth using, which will also allow you to create a bootable USB flash drive for subsequent installation of a clean system.

Using one of the programs mentioned above, it turns out to be very easy to acquire the latest build and successfully install such a system update. True, there were some complaints from some users that this update could not be installed using standard means. True, the number of successful installations significantly exceeded the percentage of failures, which, as it turned out later, in the overwhelming majority, were eliminated.

Were there any problems with version 1703?

Firstly, there were complaints that it was possible to download Windows 10 creator update 1703. Secondly, the installation itself, and then the operation of the OS installation, caused some problems. For example:

  • CS:GO fans had an unusual limitation on the number of frames per second;
  • Others complained that, for reasons unknown to them, the operating system installations were reset;
  • such an update could actually reinstall the system, and old settings were not always picked up by the updated Windows.

Therefore, at first the desire to install the 1703 part assembly was overshadowed by problems. Even now there are some problems, so before installing this software, it is advisable to backup some important user data. Microsoft also recommended preparing device drivers that can “fly” after installing this update. Keep all the tools ready to resuscitate your device.

After the release of the final Windows 10 Creators Update 1703, many users encountered a number of problems. For some, the Control Panel has disappeared; for others, the font has become large and cannot be replaced with a small one. Also, on some computers, lags began to appear when launching Explorer. Naturally, such problems are associated with new components of Windows 10 version 1703. The Microsoft forum reports that fixes will be released in the near future. However, those users who do not want to wait for the next update and want to roll back to build 1607 can use the following recommendations.

The first way to roll back working Windows 10 1703 to build 1607

If you have problems with Windows 10 build 1703, but the system works, you can rollback using the following method.

  • Click "Start" and select "Settings". Find the “Update and Security” section.
  • In the menu on the left, select the “Recovery” subsection. Here we click on the “Start” button in the “Return to the previous build of Windows 10” item.

  • A small window will appear with the reasons why you are going to rollback. Select the one you need or write a comment. Click “Next”.

  • The next step is to click “No, thanks.” The system will prompt you to install updates. Maybe updates will solve the problem, but you will install them at your own peril and risk.

  • Click “Next”.

  • Remember your login password (if you set it). Click “Next”.

  • At the last stage, click “Return to previous Windows”.

  • The computer will reboot and recovery of build 1607 will begin.

It is important to note that restoring a previous build of Windows 10 will preserve your data and settings. All settings will be saved.

Rollback of non-working Windows 10 build 1703

If your system stops booting after downloading the Creators Update, you can perform a rollback using the following method:

  • We connect the installation flash drive to the PC. Let's start the installation. Select the language and region. Click “Next”.

  • Click "System Restore".

  • A new window will appear. Select "Troubleshooting".

  • In "Advanced options" select "Return to previous version".

  • Select "Windows 10". If you just recently switched to ten, Windows may also be on the list. Click “Return to previous Windows.”

As in the previous method, the computer will reboot and recovery of the operating system will begin.

To learn how to roll back the system after a failed Windows 10 Creators Update 1703, watch the video:

You've probably already heard that Windows 10 Creators Update is officially coming out today. In this article, we decided to be one step ahead and tell you about the new features for system administrators in the next Windows 10 update (1703).

Configuration

Windows Configuration Designer

Previously this component was called Windows Imaging and Configuration Designer, ICD and was used to create provisioning packages. In this version it received a new name Windows Configuration Designer. In previous versions of Windows, it can be installed as part of the Windows ADK Deployment and Assessment Toolkit.

To make it easier to create provisioning packages in Windows Configuration Designer, Windows 10 version 1703 includes a number of new wizards.

Both desktop and kiosk versions of the wizard have the option to remove pre-installed software using the CleanPC configuration service provider.

Bulk connection to Azure Active Directory

New wizards included in Windows Configuration Designer let you create provisioning packages to join devices to Azure Active Directory. Bulk connection to Azure Active Directory is available in wizards for desktop, mobile, kiosk, and Surface Hub devices.

Windows Spotlight

New group policies and mobile device management (MDM) settings have been added:

Structure of the Start menu, Start screen, and taskbar

You probably know that businesses can change the appearance of the Start menu, Start screen, and taskbar on computers running Windows 10 Enterprise and Education editions. In version 1703, these modifications can also be applied to the Pro edition.

Previously, a custom taskbar could only be deployed using Group Policies or provisioning packages. In the new version, support for custom panels has been added to mobile device management (MDM).

Attack Detection

Key improvements in attack detection include:

Other improvements

The following improvements have also been added:
  • SD card encryption;
  • remotely reset Azure Active Directory account PINs;
  • archiving SMS text messages;
  • Wi-Fi Direct control;
  • Continuum display control;
  • individually turning off the monitor or phone screen when inactive;
  • individual definition of screen timeout;
    • .